Service Grip Dead-end
Service-Grip Dead-end,manufactured of aluminum-covered steel, is designed for bare neutral messengers of self-sup porting cable used in making service drops.The Dead-end is recommended for service drops by reason of minimum length,economy,and neatness of appearance.Mechanical strength meets the requirements for NESC Grade“N”, Rule 263-E, Supply Services, Spans not exceeding 150 feet. 264-For service drops exceeding 150 feet,Grade“C”Construction, the Distribution-Grip Dead-end is recommended. Dead-end: Coated is recommended for direct application over plastic jacketed open-wire service drops.
Crossover Marks: Indicate starting point for application.
Color Code and Length: Assist in identification of conductor size,corresponding to tabular information appearing on catalog pages.
Identification Tape: Shows catalog number, nominal sizes.
Service-Grip Dead-end,manufactured of aluminum-covered steel, is designed for bare neutral messengers of self-sup
porting cable used in making service drops.The Dead-end is recommended for service drops by reason of minimum
length,economy,and neatness of appearance.Mechanical strength meets the requirements for NESC Grade"N", Rule
E, Supply Services, Spans not exceeding 150 feet.
For service drops exceeding 150 feet,Grade"C"Construction, the Distribution-Grip Dead-end is recommended.
Dead-end: Coated is recommended for direct application over plastic jacketed open-wire service drops.
Key Features
High-quality material – Made of aluminum‑covered steel, offering a good balance of electrical conductivity and mechanical strength.
Compact design – Minimal length saves space and provides a tidy installation appearance.
Mechanical compliance – Meets NESC Grade "N" standards for spans up to 150 feet.
Tiered recommendation – For spans over 150 feet, the Grade "C" Distribution‑Grip Dead‑end is the suggested alternative.
Coated option available – The coated version is recommended for direct application over plastic‑jacketed open‑wire service drops, offering additional protection.
Application
APPLICATION-INSPECTION. Dead-ends should not be re-used after original installation.
Lay direction of both the Dead-end and the conductor should be the same. Lay direction of most neutral-messengers is
right hand lay.
The loops of Service-Grip Dead-ends should not be crisscrossed,when two or more are applied to the same spool.
Formed Wire Distribution Grip Deadend
Service-Grip Dead-end
Distribution Grip Dead End,
Distribution Tie
Transmission Distribution Line Fitting Grip Deadend
Distribution Fittings
Preformed Line Products
Grip Deadend
Strand Grips & Dead Ends
Formed Wire
| For use on:ACSR, All-AluminumAluminum Alloy, Compacted ACSR Compacted All-Aluminum | |||||||
| Model | Conductor Range | Length | Weight | Color | |||
| Min (Inches) | Max(Inches) | Min(mm) | Max(mm) | mm | Kg | ||
| SG-4500 | 0.17 | 0.20 | 4.29 | 5.03 | 279 | 0.035 | Blue |
| SG-4501 | 0.20 | 0.22 | 5.05 | 5.69 | 305 | 0.038 | White |
| SG-4502 | 0.23 | 0.26 | 5.72 | 6.53 | 330 | 0.041 | Orange |
| SG-4503 | 0.26 | 0.29 | 6.55 | 7.34 | 356 | 0.056 | Black |
| SG-4504 | 0.29 | 0.33 | 7.37 | 8.26 | 381 | 0.060 | Red |
| SG-4505 | 0.33 | 0.36 | 8.28 | 9.14 | 432 | 0.067 | Green |
| SG-4506 | 0.36 | 0.40 | 9.17 | 10.16 | 483 | 0.119 | Yellow |
| SG-4507 | 0.40 | 0.45 | 10.19 | 11.43 | 534 | 0.131 | Blue |
| SG-4508 | 0.45 | 0.51 | 11.46 | 12.95 | 584 | 0.143 | Orange |
| SG-4509 | 0.51 | 0.58 | 12.98 | 14.73 | 660 | 0.161 | Red |
Hot Tags: service grip dead-end, China service grip dead-end manufacturers, suppliers, factory
Send Inquiry
